• Stefan - stefan at riegel punkt me

• PLA 1.75mm

Drucker Maße (für Slicer):

• Druckerart: Cartesian
• Build Volume: X: 190 Y: 190 Z: 200

Slicer Settings:

• Homing Dir: :X min Y: min Z: min
• Firmware: Marlin
• Düsendurchmesser: 0.4mm
• Empfohlene Layerhöhe: 0.2mm
• Extrusion Multiplier: 1.00
• Retraction Distance: 2 mm
• Retraction Speed: 220 mm/s
• Top Solid Layers: 3
• Bottom Solid Layers: 3
• First LAyer Height: 90%
• First Layer Width: 100%
• First Layer Speed: 40%
• Default Printing Speed: 70-90mm/s
• Outline Underspeed: 80%
• Solid Infill Underspeed: 50%
• Support Structure Underspeed: 80%
• X/Y Axis Movement Speed: 160mm/s
• Z Axis Movement Speed: 160mm/s

PLA Einstellungen (Innofil):

• Extruder Temp: 195°C
• Headbed: 50-60°C

Simplify3D Profil (FFF)

Cura Profil von Steve (20.05.2016)

MatterControl von Justus (18.08.2016 14:28)

• http://reprap.org/wiki/Prusa_i3/de
• https://www.simplify3d.com